Features

For removing bearings, gears, discs, etc.

The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely.

The larger the pulling force, the stronger the puller hook's grip on the workpiece to be removed.
Universal application thanks to adjustable depths. The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside.Tightening of the pressure screw and the resulting pressure removes the part from the shaft.

If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.

The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.

Use

em no.	Clamping reach outside mm	Clamping reach outside inch	Clamping depth mm	Clamping depth inch	Clamping depth with hydraulic spindle mm	Clamping depth with hydraulic spindle inch	Number of clamping depth adjustment	Hex drive size mm	Max. tonne t	Max. torque Nm	Weight kg
206-3	500	19 3/4	540	21	490	19 1/4	3	27	12	320	12.075